Highfield Lever Ratchet Adjustable A.4260 Jib Halyard Tensioner
Allen Brothers16mm Stainless Steel Highfield Lever Ratchet 3 fixings clipped backing plate.
Can be made to fit most dinghy masts Selden or Superspars by either sliding the back plate in the sail track or self tapping into the mast.
6 Ratchet positions for adjusting rig for different wind strengths.
Typically fitted on the jib halyard to give rig tension before going out on Enterprises, GP14's etc.
Flat Back plate 16mm wide x 102mm Long with 3 fixings for extra security.
Curved Back plate version available to order.
▸ Description
16mm Stainless Steel Highfield Lever Ratchet 3 fixings clipped backing plate.
Can be made to fit most dinghy masts Selden or Superspars by either sliding the back plate in the sail track or self tapping into the mast.
6 Ratchet positions for adjusting rig for different wind strengths.
Typically fitted on the jib halyard to give rig tension before going out on Enterprises, GP14's etc.
Flat Back plate 16mm wide x 102mm Long with 3 fixings for extra security.
Curved Back plate version available to order.