Competitve Prices

Electrical

4 Position Battery Selector Switch M Series 6007 Blue Sea

4 Position Battery Selector Switch M Series 6007 Blue Sea
4 Position Battery Selector Switch M Series 6007 Blue Sea
4 Position Battery Selector Switch M Series 6007 Blue Sea
4 Position Battery Selector Switch M Series 6007 Blue Sea
4 Position Battery Selector Switch M Series 6007 Blue Sea

4 Position Battery Selector Switch M Series 6007 Blue Sea

£43.49
Stock Status: Sold Out
OUT OF STOCK. PLEASE CONFIRM AVAILABILITY VIA EMAIL OR CALL US ON 01772 708129

Blue Sea M-Series Mini Selector Battery Switch - Red 6007


Switches isolated battery banks to all loads or combines battery banks to all loads
Make before break contact design allows switching between battery banks without power interruption.

Switch Type Selector 4 Position
Colour    Red
Switch Positions    4
Battery Combine    Yes
Alternator Field Disconnect [Alternator Field Disconnect protects the diodes in the alternator in the event of the switch being switched to the OFF position while the engine is running. if the AFD is not used to protect the alternator, an LED can be connected to the AFD terminals to indicate when the battery switch is in any position but OFF.]     
Maximum Voltage    32V DC
Terminal Stud Torque    120 in-lb (13.56 Nm)
Continuous Rating [The maximum current a switch is designed to conduct for an indefinite period. ]     300A
Intermittent Rating [The maximum amount of current a switch is designed to carry for a minimum of a designated period of time.]     500A (5 min)
Cranking Rating 30 sec [Normally associated with 'cranking current' which is the current required by the starter circuit prior to engine starting. The cranking current varies significantly during the starting cycle. Initially, there is a large surge of current required to overcome the inertia and compression of the engine. This surge can be two to four times the average cranking current. Once the engine is turning there are peaks and valleys as the pistons go through the compression and exhaust cycles.
The cranking current rating is used for sizing batteries, cables, and battery switches.]     900A
Battery Inputs    2
Cable Clearance For 4/0 AWG Cables    1.12in (28.45 mm)
Cable Size to Meet Ratings    4/0 AWG (120mm²)
Mounting Holes    Accept #10 Screw
Terminal Stud Size    3/8" - 16 (M10)
Weight    0.77lb (0.35 kg)
  • Product Code:
    802755
  • SKU:
    802755
  • EAN:
    0632085060077
  • MPN:
    6007
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product