- CCR Clear Casting Epoxy is a clear, UV-stabilized epoxy system designed specifically for casting, potting, and embedding applications. Low colour and low viscosity allow for bubble-free, crystal-clear castings ideal for art and hobby applications.
- This Super Sap Formulation has two hardener speeds not included : slow (CCS) for high-build casting epoxy applications and fast (CCF) for quick, small project fast casting epoxy applications such as resin jewelry and more.
- Hardeners required either FAST (CCF Clear Casting Fast Hardener) or SLOW (CCS Clear Casting Slow Hardener) cure speeds both hardeners sold separately on our website.
Fast Cure: 90 min pot life, 24 HR tack-free time.
Slow Cure: 360 min pot life, 72 HR tack-free time.
Mixing Ratio: by Volume 2 Parts Resin to 1 Part Hardener.
Note: CCF FAST hardener should ONLY be used for low-volume (less than 1 pint) casting applications with thicknesses below 1. Using CCF FAST hardener for larger volumes or thicknesses can result in exothermic cures that will damage the epoxy.
- BEST USES
- Encapsulation or Embedding
- Bar Top Epoxy
- Resin Jewelry
- Resin Castings
- Molding Resin
- Art, Hobby, Craft Resin
- High-Build Coatings
- Mass Castings (SLOW only)
▸ Description
- CCR Clear Casting Epoxy is a clear, UV-stabilized epoxy system designed specifically for casting, potting, and embedding applications. Low colour and low viscosity allow for bubble-free, crystal-clear castings ideal for art and hobby applications.
- This Super Sap Formulation has two hardener speeds not included : slow (CCS) for high-build casting epoxy applications and fast (CCF) for quick, small project fast casting epoxy applications such as resin jewelry and more.
- Hardeners required either FAST (CCF Clear Casting Fast Hardener) or SLOW (CCS Clear Casting Slow Hardener) cure speeds both hardeners sold separately on our website.
Fast Cure: 90 min pot life, 24 HR tack-free time.
Slow Cure: 360 min pot life, 72 HR tack-free time.
Mixing Ratio: by Volume 2 Parts Resin to 1 Part Hardener.
Note: CCF FAST hardener should ONLY be used for low-volume (less than 1 pint) casting applications with thicknesses below 1. Using CCF FAST hardener for larger volumes or thicknesses can result in exothermic cures that will damage the epoxy.
- BEST USES
- Encapsulation or Embedding
- Bar Top Epoxy
- Resin Jewelry
- Resin Castings
- Molding Resin
- Art, Hobby, Craft Resin
- High-Build Coatings
- Mass Castings (SLOW only)