Competitve Prices

Marine Paint Varnish and Antifouling

Perfection Plus Two-Part Polyurethane Varnish 750ml

Perfection Plus Two-Part Polyurethane Varnish 750ml

£44.99
Stock Status: In Stock
With excellent chemical and abrasion resistance, Perfection Plus Varnish offers the ultimate, full gloss varnish performance. With UV filters to create the longest possible lifespan and is ideal for oily woods after the right preparation.
With excellent chemical and abrasion resistance, Perfection Plus Varnish offers the ultimate, full gloss varnish performance. Its improved formulation even contains UV filters to create the longest possible lifespan and is ideal for oily woods after the right preparation.
A clear, two-part polyurethane varnish that lasts up to 4 times longer that 1-part varnishes.
Chemical cure for the hardest finish & highest abrasion resistance.
Superior gloss that's resistant to fuels, oil and mild acids and alkalis.
The ultimate in varnish performance, combining excellent chemical and abrasion resistance with superb gloss. The improved formulation of Perfection Plus Varnish contains UV filters to give it the longest possible life. 
International paint claim it lasts up to four times longer service life than conventional 1-part varnishes. Fully compatible with oily woods like teak and iroko after adequate degreasing and substrate preparation.  Chemical cure gives resistance to fuels, oil and mild acids and alkalis.

Preparation
PREVIOUSLY PAINTED SURFACES Two Pack Varnish  In Good Condition Wash down with a suitable detergent, rinse with fresh water and allow to dry. Abrade with 320400 grade (grit) paper.  In Poor Condition Remove all previous coatings and prime the substrate.
BARE WOOD Sand smooth with 120 grade paper, followed by 240 and finally 320 grade paper. Remove sanding dust by brushing, dusting and wiping. If wiping with solvent then allow to dry completely before applying the first coat. Prime, if required, with Clear Wood Sealer Fast Dry.  If Clear Wood Sealer has been omitted thin the first coat by 20-25% with Thinner No.9. 
OILY WOODS e.g. Teak Must be adequately degreased (Thinners No.9 is recommended) and prepared prior to application of Perfection Plus Varnish. Ensure the surface is completely dry before applying the first coat. Sand areas that are loose or flaking with 320 grade (grit) paper.
Application
Conventional Spray Do not spray.  Roller Use foam rollers. For best results when applying by roller, smooth off with a pad or brush.  Other When applying Perfection Plus Varnish by brush or roller, it may be necessary to apply multiple coats to achieve the total specified system dry film thickness.

Features
Suitable for above the waterline
Recommended no. of coats 2 - 5
Practical coverage 12m² per litre
Mix Ratio 2:1 by volume (as supplied)
 
Protective equipment overview
Before undertaking any work, always consider the personal protective equipment that you will need.
This will change based on the job in hand and the product being used.

The purchaser is responsible for choosing the correct product for its particular application.
  • SKU:
    796478
  • EAN:
    5035686096981
  • MPN:
    YVA950
  • GTIN:
    5035686096981
  • Brand:
    International
  • Product Code:
    796478
  • Brand:
    International Paint
  • Condition:
    New
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product