Watertite 2 Part Epoxy Filler 250ml Below Waterline
International Paint- Colour YAV145/A - Light Blue Base product code is YAV335 & curing agent product code is YAA441.
- Specific Gravity 1.02
- Volume Solids 100%
- Mix Ratio 1:1 by volume (as supplied)
- Converter/Curing Agent YAA441
- Typical Shelf Life 2 yrs
- VOC (As Supplied) 0 g/lt
- Unit Size 250 ml
Watertite is al 2 Part Filler is a quick drying epoxy filler suitable for use on GRP, Metals and rigid Wood constructions. The formulation does not shrink and is extremely water resistant, making it suitable for osmosis damage repairs.
Fills up to 20 mm without sagging.
High-strength and adhesion properties, very fast drying and super smooth.
Simple 1:1 mixing ratio for easy measurement of components.
Watertite is a quick drying epoxy filler suitable for use on GRP, Metals and rigid Wood constructions.
The formulation does not shrink and is extremely water resistant, making it suitable for osmosis damage repairs.
Fill up to 20 mm without sagging * Use above and below the waterline
High strength and adhesion properties
Simple 1:1 mixing ratio for easy measurement of components
Very fast drying and Super-smooth
Do not use below 7 Degrees Celsius
The purchaser is responsible for choosing the correct product for its particular application.
▸ Description
- Colour YAV145/A - Light Blue Base product code is YAV335 & curing agent product code is YAA441.
- Specific Gravity 1.02
- Volume Solids 100%
- Mix Ratio 1:1 by volume (as supplied)
- Converter/Curing Agent YAA441
- Typical Shelf Life 2 yrs
- VOC (As Supplied) 0 g/lt
- Unit Size 250 ml
Watertite is al 2 Part Filler is a quick drying epoxy filler suitable for use on GRP, Metals and rigid Wood constructions. The formulation does not shrink and is extremely water resistant, making it suitable for osmosis damage repairs.
Fills up to 20 mm without sagging.
High-strength and adhesion properties, very fast drying and super smooth.
Simple 1:1 mixing ratio for easy measurement of components.
Watertite is a quick drying epoxy filler suitable for use on GRP, Metals and rigid Wood constructions.
The formulation does not shrink and is extremely water resistant, making it suitable for osmosis damage repairs.
Fill up to 20 mm without sagging * Use above and below the waterline
High strength and adhesion properties
Simple 1:1 mixing ratio for easy measurement of components
Very fast drying and Super-smooth
Do not use below 7 Degrees Celsius
The purchaser is responsible for choosing the correct product for its particular application.