• 3mm 7x 19 SS Wire on jib halyard, 2.5mm 7 x 19 on main halyard.
• 2 swages, 1 with hard eye (at the top) the other with soft eye loop.
• 3 Strand splice on the rope through the soft loop on the wire.
• 3 Strand pre-stretched Liros rope
• 5mm Captive shackle

Please supply with order the 2 wire lengths A and B to manufacture the wire, shown in the image by emailing marinesupplies@gapcd.co.uk


How to measure the old wire and how we make you new halyard video.

If preferred a rope halyard is available just order 4mm dyneema for a low stretch alternative for your main halyard jib halyard needs to be in wire to rope.