Whale Smart Orca Electric Auto Bilge Pump 1300gph BE1482

• High performance- 1300 US gals/hr flow rate (82 ltrs/min)
• Simple to install-built in Automatic sensorno need to fit a separate bilge switch
• Efficient - Large filter- maximum surface area exposed to bilge water
• Solid state switchingno moving parts
• Long battery life- Low amp draw
• Neat fit in compact bilge areas
• Unaffected by wave motion
• Specification
  
  • Voltage 12v
  • 1300  Gallons per Hour
  • 1100 Gallons per Hour at 1m Head
  • Current Draw 5 amp
  • Recommended Automotive Fuse Size 7.5amp
  • Hose Connection size 25mm (1")
  • Max Discharge Head 4.5m (14.8ft)
  • Overall Height 129mm (5.1")
  • Overall Width 168mm (6.6")
  • Overall Depth 121mm (4.8mm)
  • Materials Pump Body ABS, Seals Nitrile, Impellor Acetal.
  • Conforms to ISO 8849
  • CE Certified

The Orca Auto 1300 is the new addition to the IC bilge range of intelligently controlled pumps from Whale. The Orca Auto 1300 follows in the footsteps of the Supersub Smart Range, where no additional field sensor or float switch is needed rather they are integrated within the pump to ensure the most effective automatic bilge water removal. The submersible pump differs to the Supersub Range in that it is vertically stacked for larger vessels with a large footprint ensuring lowest water level detection and maximum surface area exposure to bilge water.

Click here for the installation guide

Click here for the product datasheet

The purchaser is responsible for choosing the correct product for its particular application.