Osculati Gelcoat Putty White 200g

GELCOAT PUTTY is a two-component system which was specially devised for “DIY” nautical

applications. Applied just like any other putty ,it provides a glossy varnish-like finish. Any small

imperfection on the existing gelcoat can be removed in one easy step and after polishing, the

damaged area is just as new.

Gelcoat Putty is considerably time saving, since no fillers or varnishes are needed after application.

SAFETY

During application and drying time, ventilate the room. We also recommend the use of appropriate

PPE. Before starting work, read the safety card carefully.

APPLICATION

Make sure the surfaces are completely dry and perfectly clean. Sand the surface with P 80 or P150 sandpaper for best results.

Draw the amount needed from the pack with clean tools, adding 1 to 3 grams of hardener per 100 grams of product. Mix the two components well.

Apply the putty on the surface to be treated, bearing in mind that the product can be sanded after about sixty minutes. The hardening time can be altered depending on room temperature, temperatures above 25° C shorten it and lower temperatures stretch it.

Do not put any unused product back in the pack to avoid deterioration of the entire content. Close the pack after use to prevent contact with air that can harden the product. After drying completely, sand the part with the P80, P240, P400 and 1000 sandpaper; then polish with LEVANTE POLISH ABRASIVE.