Yacht Guard Rail with Swaged Fork and Swaged Rigging Screw 4mm Stainless

Bespoke Guardrail wires made to your dimensions with Swaged Fork onto 4mm 1x19 Stainless Steel Wire and a Bluewave 5/16" UNF Stud and Closed Body Rigging Screw at the other aft end.

Instructions to measure and install.

Measure the length required between bearing surfaces between the Pulpit attachment on the bow and the Pushpit attachment at the stern, we will then make up the new guardrail with the rigging screw in the middle position allowing for adjustment either way, then order to the nearest metre longer. Please can you give the finished length in the comments on the listing or email/call 01772 708129.

To install fit the fork at the bow then release the stud from the rigging screw feed it through the top of the stanchions and re-assemble.

If measuring is difficult just post the originals to our Preston address PR2 5PB and we will copy them.

The purchaser is responsible for choosing the correct product for its particular application.

These goods should not be used for over head lifting unless specified.